> Home Page > Goods Only Lifts > Product Range > The Stannah Goodsmaster Range > 1000kg Goodsmaster

1000kg Goodsmaster

The most popular of our Goodsmaster range is a goods lift that provides a generous capacity lift with a choice of five car sizes.  Loading is at floor level via single or double hinged landing doors or an optional concertina gate.  The car entrance is protected with a collapsible gate.

 

MODEL CAPACITY CAR ENTRANCE SERVING HEIGHT SHAFT PIT (RAMP) DEPTH HEAD
ROOM
WIDTH DEPTH HEIGHT WIDTH HEIGHT WIDTH DEPTH
1000B 1000kg 1045 1235† 2000 1010 2000 FLOOR 1650 1500 150* 2800
 With single hinged door
1000EU 1000kg 1305 1235† 2000 1305 2000 FLOOR 1950 1500 150* 2800
 With double hinged doors
1000S 1000kg 1045 1735† 2000 1010 2000 FLOOR 1650 2000 150* 2800
 With single hinged door
1000D 1000kg 1445 1435† 2000 1410 2000 FLOOR 2050 1700 150* 2800
 With double hinged doors
1000DS 1000kg 1445 1735† 2000 1410 2000 FLOOR 2050 2000 150* 2800
 With double hinged doors

All Dimensions are nominal and in mm.

* Important Notes:- Motor Housing and Pit/Ramp

MOTOR HOUSING: It will be necessary to provide access for servicing via lockable double hinged doors for the full depth of the lift shaft. These are available from Stannah as an option.

* PIT OR RAMP: The Goodsmaster normally serves at floor level and would require a pit in the lowest floor. If you are unable to provide a pit, the Goodsmaster can be installed to serve at150mm above the lowest floor and a ramp will need to be provided by your builder.

† CAR DEPTH: With a through car entrance arrangement, the inside car depth reduces by 25mm nominal.

N.B. Consideration must be given to protect any accessible space beneath the bottom of the lift shaft. We would be pleased to provide further information if required.

750kg Goodsmaster diagram

1000kg Goodsmaster illustration

Safe Maintenance Access

Please be aware that current Health & Safety Regulations, i.e. Construction Design & Management and The Provision & Use of Work Equipment specify; Access to all parts of machinery requiring maintenance must be planned to be both safe and accessible. The Goodsmaster you are planning to install requires regular maintenance. Therefore careful planning will be required to ensure safe access into the motor compartment is provided. The Goodsmaster normally requires 2 maintenance access points. The location of these points of access will depend on the landing door positions needed.

For further advice please contact us on
01264 351922.

printable PDF of
this page

SPECIFICATION

Car: Constructed from mild steel sheeting; finished in a tough grey baked enamel with heavy duty vinyl covered floor.

Speed: 0.20m/s.

Entrances: Single hinged steel door on 1045mm wide lift cars. Double hinged steel doors on 1305mm and 1445mm wide lift cars. Finished in grey baked enamel. Collapsible concertina gates are available as an option on all models.

Car entrance protection: A collapsible gate is fitted to the lift car entrance(s) as standard.

Entry choice: Up to two entrances can be fitted on each floor.

Control: Fully automatic push button control with call and despatch facilities at each landing entrance.

Indicators: “Lift arrival” and “lift occupied” indicators are fitted at each entrance for extra reassurance, together with an audible lift arrival buzzer.

Travel: Up to 4 stops over a total distance of 12m of travel.

Mounting: The Goodsmaster is supplied in a structure supported frame. A solid base and support at each floor is all that is needed from your building.

Motor / Winding unit: Mounted on a bedplate fixed to the lift’s structure. The motor drives a high quality reduction gearbox with 2:1 traction roping. Efficient and quiet in operation.

Safety: Complies with the Essential Safety Requirements (ESRs) of the Supply of Machinery (Safety) Regulations 1992, also known as the Machinery Directive.

Additional options include: Intercom system positioned at each landing entrance, motor room enclosure, sheet steel cladding finished in grey baked enamel, 1800mm high lift car.